With the fast-paced development of society, there has been a phenomenon of continuity in various fields, working around the clock, including not only workers, but also various mechanical equipment, such as: electric pallet trucks, which are mainly powered by batteries , DC motor drive, handling equipment that can transport goods for a long time and short distances, is a powerful tool to replace manual labor, which greatly improves work efficiency, reduces labor costs, and reduces labor intensity.

Common faults and solutions of electric pallet trucks

Regardless of any logistics machinery and equipment, there will be more or less faults in the regular working state, which will affect everyone's use and work. Ningbo Ruyi summarizes the following common faults and solutions for electric pallet trucks:

1. The speed of the driving wheel suddenly decreases during use

Reasons: (1) The voltage of the battery is too low or the resistance at the joint is too large (2) The gear box of the drive head and the connected bearings are lack of lubricating oil

Solution: 1. Check the load voltage, and then clean the connector. 2. Check the lubricating oil, clean it and refill it with new lubricating oil.

2. Brake failure

Reasons: (1) The brake is loose or falls off, or the gap between the brake pads is too large (2) There may be a short circuit inside the disk coil of the brake

Solution: 1. Reinstall the brake and adjust it. 2. Replace with a new disk coil.

3. When the heavy object is lifted up, it is weak or cannot be lifted up.

Causes (1) The hydraulic system pipeline leaks oil. (2) The rotation speed of the motor of the hydraulic oil pump is too low

Solution: 1. Find the oil leaking pipeline and deal with it. 2. Check the lower drive motor and solve the fault.