news

home / News / How to reduce the cost of using electric forklifts?
home / News / How to reduce the cost of using electric forklifts?

How to reduce the cost of using electric forklifts?

Jul 29,2022

Doing a good job in the maintenance of the electric forklift can reasonably prolong the service life of the electric forklift. In addition, the safety of the application can also be guaranteed, so that your electric forklift works well anytime, anywhere. However, in some logistics transportation management centers and warehouses with high output power requirements, due to the large daily sales volume, some customers have not purchased enough electric forklifts to cover the work required in order to better reduce product costs, prompting Electric forklifts are basically in a 24-hour operating state, so how do you perform simple maintenance on electric forklifts to ensure your work efficiency?

1. The actual operation of the electric forklift should be carried out in strict accordance with the operation guide of the electric forklift. Forklift operators must be certified to work and must not make mistakes. Operational errors can endanger the electric forklift, and cause safety accidents and casualties of the electric forklift.


2. Keep the office environment clean, and pay attention to the cleanliness of the electric forklift itself. The natural environment at work, such as warehouses, production lines, etc. , there will inevitably be some dirt such as wood pallet debris, fresh-keeping bags, waste, rags, production and manufacturing waste, etc. If this dirt gets tangled on the wheels or tires of the electric forklift, it can be a hazard to work efficiency. So, check more to get rid of these dirt immediately, clean the pavement of the electric forklift workplace frequently, and even consider replacing wooden pallets with plastic pallets or steel pallets.

3. Immediately add gear oil and grease, the mechanical equipment of the electric forklift must be more maintained, but insufficient gear oil will cause the electric forklift to fail to reach the rated aspect ratio and rated load in its work, and also will greatly impair work efficiency.

4. Frequently disassemble and replace tires that are very prone to wear. In the necessary work, tire wear and even cracking will make the electric forklift unstable during the entire working process, and even cause great vibration, causing great damage to the electrical system and hydraulic transmission system. Therefore, when choosing an electric forklift, we should not only choose more wear-resistant tires, but also pay attention to the material and type of the wheels according to the working conditions and the specific conditions of the ground, to see if they must be equipped with shock-absorbing wheels or sandbag leggings.

5. A specific and strict electric forklift management plan is required. If you do not use an electric forklift, please remove the key to prevent other non-actual operators from causing unnecessary injury or damage due to operational errors.

6. Assign protective maintenance, formulate maintenance plans, maintain electric forklifts on time, keep pace with the times, formulate maintenance plans, and implement them, which can save a lot of money, not only to avoid common failures of key components, but also to avoid a lot of expensive maintenance costs, Extend the life of your electric forklift. In addition, battery maintenance and battery charging training are also required.

Inquiry

*We respect your confidentiality and all information are protected.